E-Magazine Subscriber Login

 

PHOTO ADS

1935 Four-Bolt Model “B”, #2105

Engine, transmission, and rear end overhauled. Front F&H Rounds with JD caps; F&H rear factory duals 7–40" tires. Has small rockshaft power lift. $14,000. Please call (785)293-4992. Serious inquiries only please. Can E-mail pictures by request at: 26inchd@gmail.com.

1959 440 Industrial, Gas

Only 2323 built. Older restoration. Runs well. 12-V. $5100. Illinois. (618)483-6241.

Reproduced Aluminum Warning

Plates for 3-Point Quik Hitches Replacement center and lower Quik-Hitch pins. Hydraulic cylinder stop pins with chain and spring steel clip, like original. Three sizes: 3/8", 7/16", and 1/2". (712)660-8447, cell; (712)273- 5273, home.

1957 “420” Utility Tractor

Built for the State of Ohio to their specifications. Touch-o-matic three-point anchor bracket that runs the full length of the rear axle housing. Adjustable drawbar, long PTO. Technical council representative says he has never seen a tractor like it and may be one of a kind; but very rare anyway. Needs restoration. Rear tires are 24x12"; front tires are 6x16". Auctioneer appraises tractor between $4000 and $8000. Asking $6500, or best offer. Blain Sapp. (614)885-9918 for more information and photos. E-mail: mjscols@yahoo.com.

Model “530” LP-Gas

With undermount exhaust, 18 engine hours since restoration. Good serial number plate. Complete three-point hitch. $15,000, or best offer. (561)742-1140, ext. 1. For additional photos please E-mail: cdminccm@comcast.net.

PAUL’S ROD & BEARING

Specializing in John Deere babbitt bearings. Let us re-pour your rod & mains for Models “A”, “B”, “D”, “G”, “H”, “L”, & “LA”.We pour tin-based babbitt for pullers. Since 1952. Two businesses, one location: 6212 NW Bell Rd., Parkville, MO 64152. (816)587-4747.

Steps for John Deere Tractors

Two models for “A”, “B”, and “G” row-crop and “50”, “60”, and “70” (without three-point hitch). Step or step with tool box will fit right or left axle. Two models for “H”, step or step with tool box.

1941 Model “H”

Recently painted. Has excellent original rear fenders and rare front wheel weights. Used to be a pulling tractor that now has .090" over the stock bore.The pulling mods for the valves, mag, head, and carb are still on the tractor which gives it a unique sound. Includes parts to put it back as a puller as well as 3 blocks, a main case, and others. Steel rear rims with new 13.6x24" rear tires. Includes new, original style gauges not yet installed. $5000. Hamilton, Ohio. (513)894-1812.

1958 Model “420” U

Completely restored tractor. Power steering, slant steering wheel, cigar lighter, new clutch and tires. (515)290-0790 or (515)733-4931.

1939 “A”, #480849

First year of styled Model “As”. My grandfather’s tractor that he bought new in 1939. Was backed off the delivery truck by my dad. 1970s restoration and has been stored in heated/humidity controlled building. Runs perfectly and is in very good condition. Located 25 miles from Sioux City, Iowa. $2850, or best offer. Cash only at time of pickup. (989)600-3691. E-mail: rh1400@att.net (for additional photos and/or details).

3010 Industrial Backhoe

Runs well, good hydraulics, good rubber. Minor leaks, needs seats and batteries. $4500. New York. (518)483-7304.

1944 Model “B”, #165651

Wide front, restored. New tires, excellent condition. $3500. Meridian, Idaho. (208)888-3337. View at: www.ceiequipment.com or contact via E-mail: markc@cescoequip.com.

3020 Row-Crop, #T112R101112R

Shipped November 4, 1966, to Minco, Oklahoma. Has Syncro-Range Transmission, LP-Gas engine. Very few made. Has GB800 Workhorse Loader. Good tractor with good rubber. $15,000. Claude Whittenburg, Box 684, Hennesey, Oklahoma 73742. (405)853-1086.

1948 Model “AW”, #624323

Shipped December 18, 1948, to El Reno, Oklahoma. Good tractor. Aftermarket three-point hitch, new front tires, good rear tires. $5500. Claude Whittenburg, Box 684, Hennesey, Oklahoma 73742. (405)853-1086.

Unstyled “AO” Brass Tag

Also have a Model “BO”. Restored in excellent condition. From a large collection. Michigan. (248)821- 0752, ask for Chuck.

1957 Model “720” LP-Gas Tractor

Excellent condition. Both wide and tricycle front ends, Quik-Tatch, and original factory John Deere umbrella with 4-legged deer. $7500. (806)392-7786 or (806)790-1772. E-mail: rmdutton119@windstream.net.

440 Industrial Crawler, gas

Runs well, nice undercarriage. Reverser, steering clutches are stuck. $4000. New York. (518)483- 7304.

1967 1020 Tractor with #37 Loader

Gas, 2900 hours, rear exhaust, good original condition. Good tires. Second owner. Illinois. (618)483-6241.

John Deere Heavy-Duty Steering Gear Lubricant Can

One pint original empty metal can, with fourlegged deer, like-new condition. Real collector item. $15 each, $75 per case of 12. Price includes shipping and handling in U.S.A. UPS only. L.E. Stevenson, 18798 Deere Path Lane, Richland Center, WI 53581. (608)538-3900.

Front Axle Extension Kit

Front axle extension kit (AB3841R/JD Accessory Catalog AC-1000). Fits 1947–up “Lettered” and “Numbered” vegetable tractors. Kit includes (1) #B2728R Extension Housing, (1) tie-rod and (1) lock bolt. One (1) Kit for $250 or two (2) Kits for $450, plus shipping. Harold Mulder. (712)737-4467, evenings. E-mail: hmulder@frontiernet.net.

Ball-Down Steering Arms

Ball-Downsteering arms (Part No. AB4686R/ Casting No. B1204R/Left Hand and Part No. AB/4685R/Casting No. B1236R/Right Hand) round tube wide fronts. Ball-down steering arms were original factory equipment on Models “50,” “60”,” late-styled “A,” “B,” “G,” unstyled and early styled “AWH,” “BWH” and “BWH-40” Tractors. Fabricated using 8625 alloy steel and machined to factory specifications. $140 per pair, plus shipping. Sold in pairs only. Harold Mulder. (712)737- 4467. Evening calls best.

John Deere 1010, #38018, gas

Three point hitch (no top link) and two PTOs. Runs well but needs restoration. $3500 or best offer. Also, one-row cultivator for Model “LA” and two-row Quik-Tatch cultivator. John Goettemoeller at (937)606-0512,(evenings). Email: Goettemoeller@embarqmail.com.

 

© 2012 Two-Cylinder® Club